Silentknight SK-5208 Conventional FACP 10-30 Zone User Manual download pdf (Page 70)

Model SK-5208 Installation Manual 151204

5-5

A Model 7641 EOL resistor/diode assembly is required when connecting the FACP to releasing solenoids. The

7641 allows the FACP to supervise the wiring between its NACs and the releasing solenoid.

Figure 5-4 Solenoid Wiring Configuration

Do not mix cross alarming zones with smoke verification zones. There must be at least two automatic detection

devices in each protected space. Spacing must be reduced to 0.7 tines the linear spacing in accordance with

NFPA72. See Section 4.2.1 for zone option programming.

Figure 5-5 is an example of how cross alarming may be programmed.

Figure 5-5 Example Showing Smoke Detector Cross Alarm Application

Table 5-4: Approved Releasing Solenoids

Manufacturer Part Number Rating

Asco

T8210A107 24 VDC, 16.8 W

8210G207 24 VDC, 10.6 W

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 101 102

No comments

Silentknight SK-5208 Conventional FACP 10-30 Zone User Manual Page 70